Coyote DH3 when just purchased
Link to Home page
Building my self a freeride bike from
My new Crank Bros 5050XX pedals. I am still trying to decide which colour scheme to use, which ever it will be, they seem to nice to fit to the bike and stand on!
a Coyote DH3 frame purchased from a friend.
Coyote DH3 Frame, crank and bottom bracket when first purchased.
Coyote DH3
Rear suspension arms stripped and all bearings pressed out for replacing.
Shock link arms with old bearings ready for pressing out.
Hope Mono M4, rear caliper & plus 20mm spacer for 200mm disc.
Hope Mono 6Ti, front caliper & floating 205mm disc. (6 bolt disc will be replaced with a 5 bolt for the BigUn hub soon).
Azonic World Force stem
Pace RC150 Monsters, ready for a strip and service
Old DNM rear shock
New Fox Vanilla RC shock with 550lb spring to be upgraded with a 650lb spring.
Cranks with polished arms to remove Shimano branding
Crank Bros 5050XX
Crank Bros 5050XX
Link to RC150 Strip down & Servicing page
New BETD uprated lower shock bush to strengthen a known weakness of the rear suspension design.
Crank Bros 5050XX